The number of milliliters in a pint of beer depends on the type of pint being used. A British imperial pint contains 568.261 ml, give or take a few more decimal places, whereas an American pint contains 473 ml. In the United States, a liquid pint is legally defined as one-eighth of a liquid gallon, or exactly 231 cubic inches. In the United Kingdom, Ireland, and most European countries, a pint is defined as 568 ml, which is more than half a liter.
Characteristics | Values |
---|---|
British imperial pint | 568.261ml |
American pint | 473ml |
What You'll Learn
The British imperial pint is 568ml
In the UK and Ireland, a pint of beer will be served as 568ml, which is more than half a litre. The imperial pint is also used in Canada, where a "pint" of less than 554ml is an offence, though this regulation is rarely enforced. In Australia, ordering "a pint of beer" will result in 425ml being served, and customers must specifically request an imperial pint to get 570ml. In New Zealand, there is no legal requirement for beer to be served in standard measures, and a "pint" usually contains 425ml.
The British imperial pint is also etched into the official European Union pint seal, which is stamped on glasses to ensure authenticity. These glasses are designed with a heavy ridge for durability and easy stacking, and they are strong enough for worry-free stacking.
Craft Beers: 99 Pints and Their Varied Personalities
You may want to see also
The US pint is 473ml
The US pint is a unit of volume or capacity in the United States customary measurement system. It is one-eighth of a gallon. In the US, there are two kinds of pints: a liquid pint (473ml) and a less common dry pint (551ml).
The British imperial pint, on the other hand, is used in the United Kingdom and Ireland and, to a limited extent, in Commonwealth nations. It was standardised in the 17th century by King Charles II of England, who set the measure at 20 fluid ounces.
The difference between the US and British imperial pints can be attributed to the fact that the two systems are defined differently. While the US liquid pint is legally defined as one-eighth of a liquid gallon of precisely 231 cubic inches, the British imperial pint is derived from an imperial gallon based on ten pounds of distilled water at 62°F (16.667°C) (277.42 cubic inches).
It is important to note that the term "pint" can vary in different countries and regions, and the volume it represents can differ significantly.
Hazy IPAs: Unfiltered Bliss or Just a Fad?
You may want to see also
A pint in South Australia is 425ml
A pint of beer can mean different things to different people. For some, it's a chance to bond with friends, while for others, it's a competition to see who can drink the most. But it's important to be cautious, as a pint of beer can contain more alcohol than you might expect. The size of a pint varies depending on the country and even the region you're in.
In South Australia, a pint of beer is 425ml. This is substantially smaller than the imperial pint of 568-570ml served in the rest of Australia and elsewhere. The South Australian pint is known as a "reputed pint", and its unique size is a source of confusion and consternation for many.
The history of the South Australian pint is a bit of a mystery. One theory suggests that the Temperance movement lobbied for smaller glass sizes to reduce public drunkenness. Another theory points to the Great Depression, when drinkers could only afford smaller serves. Some also speculate that it may have been due to tax reasons. However, these theories are incomplete, and there is little corroborating evidence.
The variation in glass sizes in Australia is likely a flow-on effect of differences in the way beer was bottled. Breweries began to experiment with bottle sizes, and the glass sizes used to serve beer followed suit. Over time, the "reputed pint" in South Australia shrunk from 18 fluid ounces to 16, and eventually to its current size of 15 fluid ounces (425ml).
The South Australian pint is an anomaly, and even within the state, there are efforts to adopt the more standard imperial pint. The smaller size may be a vestige of the state's colonial past, as the pre-federation colonies were essentially separate countries, and they continue to do things differently in many areas.
So, if you're ordering a pint of beer in South Australia, be aware that you'll be getting 425ml, not the standard imperial pint served elsewhere.
German Beer: Unique Brewing Traditions and Flavors
You may want to see also
A pint in Israel is 360-440ml
The pint is a unit of volume or capacity in both the imperial and United States customary measurement systems. The British imperial pint is about 20% larger than the American pint. In the UK and Ireland, a pint is 568 ml, while in the US, a liquid pint is 473 ml.
In Israel, a pint of lager costs £5.60 GBP. However, it is unclear what the volume of this pint is. In some countries, the volume of a pint varies by regional custom. For example, in South Australia, a "pint of beer" results in 425 ml being served, while customers must specifically request an "imperial pint of beer" to receive 570 ml. In Canada, a "pint" of less than 554 ml of beer is an offence, though this regulation is often violated and rarely enforced.
Therefore, it is possible that a pint in Israel could be 360-440 ml, depending on the specific region and the custom there.
Blonde vs. White Beer: Understanding the Key Differences
You may want to see also
A pint is 16 US fluid ounces
In the US system, the dry pint is slightly larger than a liquid pint. This is because dry ingredients and liquid ingredients often vary in weight. In the British system, the measurements for both liquid and dry pints are the same.
The term "pint" comes from the Old French word "pinte" and perhaps ultimately from the Vulgar Latin "pincta", meaning "painted". It refers to the marks painted on the side of a container to show its capacity.
The US liquid pint is legally defined as one-eighth of a liquid gallon of precisely 231 cubic inches. The British imperial pint is equal to one-eighth of an imperial gallon.
In the US, a liquid pint is approximately 473 ml. In the UK, a pint is about 568 ml.
What's the Real Difference in Draft Beer?
You may want to see also
Frequently asked questions
There are 568ml in a pint of beer in the UK.
There are 473ml in a pint of beer in the US.
Pubs in Israel use the term "pint" arbitrarily, with "pints" of beer ranging from 360ml to 440ml.
Federal law in Canada mandates the use of the imperial pint, which is 568ml. However, this law is not always enforced in certain provinces, where establishments may sell US pints or other measures as "pints".
In Australia, a "pint" typically refers to 425ml of beer, which is known as a schooner in the rest of the country. However, in South Australia, a "pint" refers to 570ml of beer.