Mr Beer In Canada: Where To Buy?

Mr. Beer's Canadian Blonde Deluxe Refill is a classic, easy-drinking Canadian-style beer with a light colour, a clean and fresh palate, subtle hop notes, and a crisp finish. The refill includes everything needed to brew 2 gallons of beer in approximately 2 weeks. It can be purchased from the Mr. Beer website, Amazon, and Niagara Tradition Homebrew Supply.

Mr Beer Canadian Blonde reviews

Mr Beer Canadian Blonde is a light and refreshing beer with subtle hop notes and a crisp finish. It is a classic, easy-drinking Canadian-style beer with a balanced flavour and an ABV of 3.7%. The recipe includes brewer's yeast and a no-rinse cleanser, and it will produce 2 gallons of beer in approximately 2 weeks.

Canadian Blonde has received positive reviews, with an average rating of 4.8 out of 5 stars from 60 customers on the Mr Beer website. Many reviewers highlight the beer's similarity in taste to popular Canadian beers like Molson Canadian and Moosehead, with some noting that it tastes even fresher since it is homemade. One reviewer praised its versatility as a base for experimentation, creating their own version with added honey, apricot extract, and coriander.

Some reviewers shared their unique twists on the Canadian Blonde recipe. One adventurous brewer used it as a base for a Ranger IPA, adding maple syrup, cascade hops, and citrus/ginger mulling spices. Another reviewer created a fruity variation by adding a lime popsicle, cherry juice, and tangerine juice to the mix.

In terms of the brewing process, one reviewer mentioned that the suggested amount of sugar for carbonation did not seem sufficient, and they had to let the beer sit longer for proper carbonation. Another reviewer emphasised the importance of allowing the beer to condition in bottles for the full recommended time, noting that the beer improves with age.

Overall, Mr Beer Canadian Blonde is a well-liked product, with many reviewers expressing their satisfaction with the taste and ease of brewing.

Where to buy Mr Beer Canadian Blonde in Canada

Mr. Beer Canadian Blonde is a lightly coloured, easy-drinking beer with a fresh palate, subtle hop notes, and a crisp finish. It is a classic Canadian-style beer with an ABV of 3.7% and an IBU of 13. The product includes a can of Canadian Blonde Brewing Extract and a packet of dry brewing yeast.

You can purchase Mr. Beer Canadian Blonde from the Mr. Beer website, which offers free shipping on orders over $75. The product is also available on nthomebrew.com, which ships from the US to Canada.

In addition to the standard refill, Mr. Beer offers a Canadian Blonde Deluxe Refill, which includes two pouches of BrewMax Pale LME and a packet of No-Rinse Cleanser in addition to the brewing extract and yeast. This deluxe version is perfect for those who enjoy drinking Moosehead, Molson Canadian, or Labatt Blue and want to recreate that taste at home.

Both the standard and deluxe refills are designed for brewing 2-gallon batches and will be ready to drink in approximately 2-3 weeks.

Mr Beer Canadian Blonde ingredients

Mr Beer's Canadian Blonde Deluxe Refill includes all the ingredients you need to brew 2 gallons of great-tasting, classic Canadian-style beer. The refill is designed to be brewed within 10 to 14 days and will produce approximately 8 liters of beer.

The ingredients included in the Canadian Blonde Deluxe Refill are:

• 1 can of Canadian Blonde HME (Malt Brewing Extract)
• 2 pouches of BrewMax Pale LME
• 1 packet of dry brewing yeast
• 1 packet of No-Rinse Cleanser

The Canadian Blonde Standard Refill is similar but does not include the 2 pouches of BrewMax Pale LME.

The malt brewing extract is formulated and produced by master brewers at Coopers Brewery in Australia, using the highest-quality, all-natural barley and hops. The yeast included in the refill is proprietary to Coopers and performs well across a wide range of temperatures.

In addition to the ingredients included in the refill, you will need cold water (ideally from the refrigerator or a spring/filtered water source) and carbonation drops or table sugar for carbonation.

The brewing process involves combining the malt extract with yeast, which then eats the sugars in the malt to produce alcohol and carbon dioxide through fermentation. This process takes 10 to 14 days, after which the beer can be bottled and carbonated.

Mr Beer Canadian Blonde recipe

Mr Beer's Canadian Blonde is a classic, easy-drinking Canadian-style beer. It is lightly coloured with a clean, fresh palate, well-balanced with subtle hop notes and a crisp finish. The beer is crafted by master brewers at Coopers Brewery in Australia, using the highest quality, all-natural barley and hops.

The Canadian Blonde Standard Refill comes with everything you need to brew 2 gallons of beer in approximately 2 weeks. This includes:

• Canadian Blonde HME
• 2 Bags of BrewMax Booster
• 1 Packet of No-Rinse Cleanser
• 1 Packet of Brewing Yeast

The Deluxe Refill includes the same ingredients, with the addition of 2 Pouches of BrewMax Pale LME.

Ingredients:

• 1 Packet of Brewing Yeast
• 1 Packet of No-Rinse Cleanser
• 2 Pouches of BrewMax Pale LME
• 2 Bags of BrewMax Booster
• 1 Can Canadian Blonde Brewing Extract

Method:

• Fill a clean keg with warm water to line mark 1 on the back. Add 1/2 pack (about 1 tablespoon) of No-Rinse Cleanser and stir until dissolved. Save the remaining cleanser for bottling.
• Screw on the lid and swirl the keg so that the cleaning solution covers the entire interior. Allow to sit for at least 2 minutes, then swirl again.
• Clean the spigot by opening it fully and letting liquid flow for 5 seconds, then close.
• Pour the remaining solution into a large bowl and place your utensils into the bowl to keep them clean throughout the brewing process. Leave them immersed for at least 2 minutes.
• Do not rinse or dry the keg or utensils. Return the lid to the keg and proceed to brewing.
• Remove the yeast packet from under the lid of the can of brewing extract, then remove the label from the can. Place the unopened can in hot tap water.
• Using a clean measuring cup, pour 4 cups of water into a 4-quart or larger pot. Bring the water to a boil, then remove from heat.
• Open the packet of BrewMax LME and the can of brewing extract, pouring them into the pot. Stir until thoroughly mixed. This mixture is the wort.
• Fill the keg with cold water to line mark 1 on the back. The water should be 40-55°F/4-12°C. Use bottled spring water or filtered tap water for best results.
• Pour the wort into the keg and then bring the volume of the keg up to line mark 2 by adding more cold water. Mix vigorously with a plastic spoon/ whisk, being careful not to scratch the inside of the keg.
• Sprinkle the entire yeast packet into the keg and then screw on the lid. Do not stir.
• Allow the fermenter to sit for 10-14 days in a cool, dark place between 68-78°F/20-26°C. The ideal temperature range is 70-72°F / 21-22°C.
• After 10 days, taste a small sample to determine if the beer is fully fermented and ready to bottle. If it tastes sweet, let it ferment for another 4 days (14 total).
• When your beer is ready, fill a 1-gallon container with warm water and add the remaining No-Rinse Cleanser, stirring until dissolved.
• Distribute the cleaning solution equally among the bottles. Screw on caps and shake bottles vigorously. Allow to sit for 10 minutes, then shake again. Remove caps and empty the solution into a large bowl.
• Add 2 Carbonation Drops to each 740-mL bottle. For 1-liter bottles, add 2 ½ drops; for ½-liter bottles, add 1 drop.
• Fill each bottle to about 2 inches from the top. Place caps on bottles, hand tighten, and gently turn the bottle over to check the seal.
• Store the bottles upright and out of direct sunlight in a location with a consistent temperature between 70°-76°F or 21°-24°C. Allow to sit for a minimum of 14 days.

Your Canadian Blonde beer is now ready to drink!

Mr Beer Canadian Blonde brewing process

The Mr Beer Canadian Blonde Deluxe Refill is a home-brewing kit that allows you to make your own Canadian-style beer. The beer is described as lightly coloured, with a clean, fresh palate, well-balanced with subtle hop notes and a crisp finish. It is also rated as an easy-drinking beer.

The kit includes a can of Canadian Blonde Brewing Extract, two pouches of BrewMax Pale LME, a packet of No-Rinse Cleanser, and a packet of brewing yeast. The yeast is designed to work across a wide range of temperatures. The kit is enough to brew two gallons of beer, which will be ready in around two to three weeks.

The first step in the brewing process is cleaning. This is an important step to kill any bacteria, wild yeast, or moulds that may cause off-flavours in the beer. The kit includes a No-Rinse Cleanser, and the instructions specify which equipment to clean and how to do so.

The next step is brewing. This involves combining a malt brewing extract with yeast, which will eat the sugars in the malt, producing alcohol and carbon dioxide. This process is called fermentation. The instructions specify the order in which to add the ingredients, the amount of water to use, and the temperature it should be. The fermenter should then be left for 10-14 days in a cool, dark place.

After 10 days, you can taste a small sample to see if the beer is ready to bottle. If it tastes like flat beer, it is ready; if it is sweet, it needs more time. The bottling process is then outlined in the instructions, including how to clean the bottles, and how to add carbonation drops.

The beer should then be stored for a minimum of 14 days, and ideally be tasted after 48 hours of refrigeration.

Frequently asked questions